Shop
Showing 101–150 of 221 results
-
-
Plastic Testing ProductsImpact Tester
model IT
Pendulum impact tester, up to 15J (Charpy), 22J (Izod)
The TOYOSEIKI Impact Tester IT is a pendulum impact tester which measures absorbed impact energy of plastic specimens based on Izod, Charpy and Tensile strength method.
-
-
-
-
-
-
-
-
-
-
-
-
-
Plastic Testing ProductsLabo Plastomill
LAB – SCALE EXTRUSION & COMPOUNDING SYSTEMS
(Base unit)
Laboratory mixer & extruder system
The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.
-
Plastic Testing ProductsLabo Plastomill (Mixer)
The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.
-
Plastic Testing ProductsLabo Plastomill Micro
Bench-top laboratory mixer & extruder system
The TOYOSEIKI Labo Plastomill Micro evaluate kneading and extrusion characteristics of very small quantities of materials.
-
-
-
-
-
-
-
-
-
-
Plastic Testing ProductsMeasuring Dies for Extruder
The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.
-
Plastic Testing ProductsMelt Flow Rater
Fully Automated Melt Indexer
model D-MThe TOYOSEIKI Melt Flow Rater is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238 in fully automated mode. This machine follows a sequential operation from the loading of materials, testing, data processing to the cleaning of barrel and performing the next test all on its own. This tremendously reduces the workload of the user who can go on to perform other job functions after loading in the samples.
-
Melt Flow IndexerMelt Indexer
Model G-02
The TOYOSEIKI Melt Indexer G-02 is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238.
-
Melt Flow IndexerMelt Indexer – Multi Weight
Model G-02 Multi-weight
Semi-automated model for multiple weights testThe TOYOSEIKI Melt Indexer G-02 Multi-weight is designed for ASTM D 1238 procedure D, multiple weights test. Up to 8 different weights can be used with automatic selection. Multi-weight concept (Automatic selection of the test weights) enables the user to perform measurement similar to a capillary rheometer with different test loads.
-
-
Rubber Testing ProductsMooney Viscometer
Model AM-4
The TOYOSEIKI Mooney Viscometer model AM-4 conducts Mooney viscosity test and Mooney scorch test of un-vulcanized rubber according to ISO 289 (JIS K6300-1).
-
-
-
-
-
-
-
Plastic Testing ProductsNotching Tool
model A-4 / A-4E
Advanced milling type notcher for Izod/Charpy impact test specimen
The TOYOSEIKI Notching Tool A-4 series are miniature, computerized, numerically controlled milling machine for preparing a variety of notched specimen bars. All operations except mounting and dismounting of the specimens are automatic. It automatically positions and cut according to specimen and notch dimensions. The instrument employs a precision servo motor control system with a touchscreen control display. Safety interfaces protect the operator from accidents. The cutter speed and table travel speed can be optimized for the specimen’s material. The instrument can store up to 99 (16 for A-4E) user-defined cutting programs. Bars can also be automatically cut from the ISO multipurpose specimens (A-4 only).
-
-
-
Plastic Testing ProductsPelletizer & Conveyor for Extruder
The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.
-
-
Rubber Testing ProductsPICMA Tack Tester
Model P-3
The TOYOSEIKI PICMA Tack Tester measures tacking strength between un-vulcanized rubbers and between un-vulcanized rubber and other materials. Tacking strength of other adhesive materials can also be measured.
-
-
-
-
-
-
