Specifications:
| Measurement method | Load cell (Capacity: 100N) |
|---|---|
| Measuring load range | 0.0 to 30.0N (Resolution: 0.1N) |
| Sticking load (Dead weight) |
2 to 5N (Standard) Max. 20N (Optional) |
| Number of times to perform measurement (N) |
1, 3, 5 (Selectable) |
| Sticking time | 0.0 to 99.9 sec. (0.1 sec. steps) |
| Specimen mounting wheel Down speed |
Can be set “LOW” or “HIGH”
LOW (60mm/min.) |
| HIGH (1000mm/min.) | |
| Specimen mounting wheel UP speed (Separating speed) |
Select one type from below when ordering
Wide speed: 5, 10, 50, 100, 500, 1000, 1500, 3000mm/min. |
| Low speed : 5, 7.5, 10, 15, 20, 25, 30, 50mm/min. (≒P-1) | |
| High speed: 100, 500, 700, 1000, 1250, 1500, 2000, 3000mm/min. (≒P-2) | |
| Specimen mounting wheel drive method |
Servo motor |
| Tackiness indicator | 7seg LED |
| Interface | RS-232 x 1 |
| Power requirement | Single-phase, AC100 to 240V, 50/60Hz, 0.5kVA |
| Dimensions | W300 x D330 x H510mm |
| Weight | Approx. 18kg |
