Plastic Testing Products

Showing all 40 results

  • Plastic Testing Products

    Bendograph

    Fully automated bend / flexure testing machine for plastic specimens

    The TOYOSEIKI Bendograph is designed exclusively for the automatic flexural testing of plastic specimens. Other than the setting up of specimens, all operations including testing and data processing are performed automatically. This machine‘s compact design is good for laboratories that have limited space and would otherwise be unable to fit a similar machine.

  • Plastic Testing Products

    Creep Tester

  • Plastic Testing Products

    Dart Impact Tester

    Falling dart impact tester for plastic films

    The TOYOSEIKI Dart Impact Tester evaluates impact rupture strength by measuring impact energy applied to plastic films.

  • Plastic Testing Products

    Digi Thickenss Tester

  • Plastic Testing Products

    Du Pont Impact Tester

    Impact tester for measurement of impact resistance of coatings or plastic sheets

    The TOYOSEIKI Du Pont Type Impact Tester is a impact tester which measures impact resistance of coatings or plastic sheets.

  • Plastic Testing Products

    Fatigue Tester

  • Plastic Testing Products

    Film Impact Tester

    Model FT-M & FT-DG
    Puncture Impact tester for measurement of impact resistance of plastic films

    The TOYOSEIKI Film Impact Tester is a puncture impact tester which measures impact resistance of thin materials such as plastic films by puncturing of a hemispherical hammer.

  • Plastic Testing Products

    Film Impact Tester with Thermostatic Chamber

    Puncture Impact tester for measurement of impact resistance of plastic films

    The TOYOSEIKI Film Impact Tester is a puncture impact tester which measures impact resistance of thin materials such as plastic films by puncturing of a hemispherical hammer.

  • Plastic Testing Products

    Film Take-Up Device for Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    HDT Tester

    The TOYOSEIKI HDT / VICAT Tester uses a 2 steps split loading system to ensure simultaneous application of the load on the specimens, applying a consistent fixed stress to the specimens. Using their patented design of the stirring and circular flow, Toyoseiki is able to ensure the temperature uniformity of the oil bath, achieving a precision of ±0.5ºC throughout in the tank. Equipped with high precision LVDT, and Pt100 temperature sensor at each station, TOYOSEIKI’s HDT / VICAT Tester is able to provide consistent, stable results when measuring the temperature as the limiting distortion is reached.

  • Plastic Testing Products

    Impact Tester

    model IT

    Pendulum impact tester, up to 15J (Charpy), 22J (Izod)

    The TOYOSEIKI Impact Tester IT is a pendulum impact tester which measures absorbed impact energy of plastic  specimens based on Izod, Charpy and Tensile strength method.

  • Plastic Testing Products

    Labo Plastomill

    LAB – SCALE EXTRUSION & COMPOUNDING SYSTEMS

    (Base unit)
    Laboratory mixer & extruder system

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Labo Plastomill (Mixer)

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Labo Plastomill Micro

    Bench-top laboratory mixer & extruder system

    The TOYOSEIKI Labo Plastomill Micro evaluate kneading and extrusion characteristics of very small quantities of materials.

  • Plastic Testing Products

    Measuring Dies for Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Melt Flow Rater

    Fully Automated Melt Indexer
    model D-M

    The TOYOSEIKI Melt Flow Rater is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238 in fully automated mode. This machine follows a sequential operation from the loading of materials, testing, data processing to the cleaning of barrel and performing the next test all on its own. This tremendously reduces the workload of the user who can go on to perform other job functions after loading in the samples.

     

  • Melt Flow Indexer

    Melt Indexer

    Model G-02

    The TOYOSEIKI Melt Indexer G-02 is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238.

  • Melt Flow Indexer

    Melt Indexer – Multi Weight

    Model G-02 Multi-weight
    Semi-automated model for multiple weights test

    The TOYOSEIKI Melt Indexer G-02 Multi-weight is designed for ASTM D 1238 procedure D, multiple weights test. Up to 8 different weights can be used with automatic selection. Multi-weight concept (Automatic selection of the test weights) enables the user to perform measurement similar to a capillary rheometer with different test loads.

  • Plastic Testing Products

    MVSS Flammability

  • Plastic Testing Products

    Notching Tool

    model A-4 / A-4E

    Advanced milling type notcher for Izod/Charpy impact test specimen

    The TOYOSEIKI Notching Tool A-4 series are miniature, computerized, numerically controlled milling machine for preparing a variety of notched specimen bars. All operations except mounting and dismounting of the specimens are automatic. It automatically positions and cut according to specimen and notch dimensions. The instrument employs a precision servo motor control system with a touchscreen control display. Safety interfaces protect the operator from accidents. The cutter speed and table travel speed can be optimized for the specimen’s material. The instrument can store up to 99 (16 for A-4E) user-defined cutting programs. Bars can also be automatically cut from the ISO multipurpose specimens (A-4 only).

  • Plastic Testing Products

    Pelletizer & Conveyor for Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Sample Puncher

  • Plastic Testing Products

    Semi Auto Melt Indexer

    Model 2A

    The TOYOSEIKI Semi Auto Melt Indexer is designed for measuring of Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238 with semi-automated functions such as assisted weight lifting, residue purging and assisted cleaning to ease the user‘s burden during operation.

  • Plastic Testing Products

    Sheet Impact Tester

    Impact tester for measurement of impact resistance of coatings or plastic sheets

    The TOYOSEIKI Du Pont Type Impact Tester is a impact tester which measures impact resistance of coatings or plastic sheets. Sheet Impact Tester is an advanced model which has weight lifting device.

  • Plastic Testing Products

    Single Screw Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Stick Maker

  • Plastic Testing Products

    Strograph AE Film

    Fully automated tensile testing machine for plastic films

    The Toyoseiki Strograph AE Film is a fully automated tensile testing machine which is designed exclusively for plastic
    films.

  • Plastic Testing Products

    Strograph AP3

    Fully automatic tensile testing machine for plastic specimens

    The TOYOSEIKI Strograph AP3 is a fully automated tensile testing machine which is designed for plastic specimens. The machine operates a sequential operation from dimensions measurement, chucking, tensile testing, and mark-tracing to data processing by simply loading specimens into cartridge.

  • Plastic Testing Products

    Strograph E3

    Single column, tabletop universal testing machines, up to 1kN

    The TOYOSEIKI Strograph E3 series are the most cost effective single column tabletop universal tensile machines designed for testing tensile, bend/flexure, compression, peel, friction etc. of various materials, ranging up to 1kN.

  • Plastic Testing Products

    Strograph S series

    Dual column, universal testing machine, up to 50kN

    The TOYOSEIKI Strograph S series dual column, universal testing machines are designed for testing tensile, bend/flexure, compression, peel, friction etc. of various materials, ranging up to 20kN (S20, S20-F), 50kN (S50, S50-F).

  • Plastic Testing Products

    Strograph T

    Universal testing machine with environmental chamber (-50 to +200ºC)

    The TOYOSEIKI Strograph T universal testing machine with environmental chamber is capable of performing tensile, bending and flexural tests at temperatures in the range of -50 to +200ºC, load up to 10kN. Specially designed main unit and thermostatic chamber provides large crosshead stroke.

  • Plastic Testing Products

    Strograph VGS/VG Series

    Dual column, universal testing machine, up to 5kN (VGS), 20kN (VG)

    The TOYOSEIKI Strograph VGS/VG series dual column, universal testing machines are designed for testing tensile, bend/flexure, compression, peel, friction etc. of various materials, ranging up to 5kN (VGS), 20kN (VG).

  • Plastic Testing Products

    Tape Press Roll

  • Plastic Testing Products

    Temperature – Controlled Impact Tester

    Pendulum impact tester with temperature chamber

    The TOYOSEIKI Temperature-controlled Impact Tester is a pendulum impact tester which measures absorbed impact energy of plastic specimens based on Izod, Charpy and Tensile strength method at low temperature.

Scroll to Top