Toyoseiki – SAMS ADVANCED CLIMATIC TECHNOLOGIES PVT LTD

Toyoseiki

Showing 1–50 of 85 results

  • Paper & Pulp Testing Products

    Auto Sheet Press

  • Rubber Testing Products

    Automatic Densimeter

    model DSG-1

    The TOYOSEIKI Automatic Densimeter measures density of materials such as polymers or rubber in various forms. The weighing operation is fully automatic and the density of the sample is automatically calculated and displayed on the screen at the end of the test. By using the optional attachments, it can also be used to determine density / specific gravity of liquids and rate of change of volume etc. An optional temperature sensor can also be added to allow direct measurement and input of air and
    Liquid temperatures.

  • Rubber Testing Products

    Automatic Densimeter ( model DSG-A )

    model DSG-A
    Fully Automated Density Tester

    The TOYOSEIKI Automatic Densimeter, DSG-A measures the density of rubber samples with fully automated operation.

  • Rubber Testing Products

    Automatic UTM

  • Plastic Testing Products

    Bendograph

    Fully automated bend / flexure testing machine for plastic specimens

    The TOYOSEIKI Bendograph is designed exclusively for the automatic flexural testing of plastic specimens. Other than the setting up of specimens, all operations including testing and data processing are performed automatically. This machine‘s compact design is good for laboratories that have limited space and would otherwise be unable to fit a similar machine.

  • Rubber Testing Products

    Capilograph

    model F-1 / F-2

    Capillary Rheometer (Single & twin bore barrel)

    The TOYOSEIKI Capilograph measures melt viscosity of polymers by detecting the shear rate and shear stress of melt polymer when it flows out of the capillary die. Die swell and melt strength can also be measured by equipping it with optional attachments.

  • Plastic Testing Products

    Creep Tester

  • Plastic Testing Products

    Dart Impact Tester

    Falling dart impact tester for plastic films

    The TOYOSEIKI Dart Impact Tester evaluates impact rupture strength by measuring impact energy applied to plastic films.

  • Plastic Testing Products

    Digi Thickenss Tester

  • Paper & Pulp Testing Products

    Digital Thickness Tester

    The TOYOSEIKI Digi Thickness Tester measures thickness of paper etc. according to JIS.

  • Plastic Testing Products

    Du Pont Impact Tester

    Impact tester for measurement of impact resistance of coatings or plastic sheets

    The TOYOSEIKI Du Pont Type Impact Tester is a impact tester which measures impact resistance of coatings or plastic sheets.

  • Plastic Testing Products

    Fatigue Tester

  • Plastic Testing Products

    Film Impact Tester

    Model FT-M & FT-DG
    Puncture Impact tester for measurement of impact resistance of plastic films

    The TOYOSEIKI Film Impact Tester is a puncture impact tester which measures impact resistance of thin materials such as plastic films by puncturing of a hemispherical hammer.

  • Plastic Testing Products

    Film Impact Tester with Thermostatic Chamber

    Puncture Impact tester for measurement of impact resistance of plastic films

    The TOYOSEIKI Film Impact Tester is a puncture impact tester which measures impact resistance of thin materials such as plastic films by puncturing of a hemispherical hammer.

  • Plastic Testing Products

    Film Take-Up Device for Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Paper & Pulp Testing Products

    Friction Tester AN

    Model AN, AN-S2
    Inclined Plane method friction ( Slip angle ) tester

    The TOYOSEIKI Friction Tester model AN, AN-S2 evaluates friction coefficient by placing sample (block) on an inclined plane, gradually increasing the angle of inclination and determining the angle at which the block starts moving.

  • Rubber Testing Products

    Fully Automated Sample Feeders

    Fully automated sample feeders for Rotorless Rheometer, model RLR-4

    Fully automated sample feeders are available as option for No.292 Rotorless Rheometer, model RLR-4. Following 3 models are selectable.

  • Ink Paint _ Others

    Grind Meter

  • Plastic Testing Products

    HDT Tester

    The TOYOSEIKI HDT / VICAT Tester uses a 2 steps split loading system to ensure simultaneous application of the load on the specimens, applying a consistent fixed stress to the specimens. Using their patented design of the stirring and circular flow, Toyoseiki is able to ensure the temperature uniformity of the oil bath, achieving a precision of ±0.5ºC throughout in the tank. Equipped with high precision LVDT, and Pt100 temperature sensor at each station, TOYOSEIKI’s HDT / VICAT Tester is able to provide consistent, stable results when measuring the temperature as the limiting distortion is reached.

  • Plastic Testing Products

    Impact Tester

    model IT

    Pendulum impact tester, up to 15J (Charpy), 22J (Izod)

    The TOYOSEIKI Impact Tester IT is a pendulum impact tester which measures absorbed impact energy of plastic  specimens based on Izod, Charpy and Tensile strength method.

  • Ink Paint _ Others

    Inkometer

  • Plastic Testing Products

    Labo Plastomill

    LAB – SCALE EXTRUSION & COMPOUNDING SYSTEMS

    (Base unit)
    Laboratory mixer & extruder system

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Labo Plastomill (Mixer)

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Labo Plastomill Micro

    Bench-top laboratory mixer & extruder system

    The TOYOSEIKI Labo Plastomill Micro evaluate kneading and extrusion characteristics of very small quantities of materials.

  • Plastic Testing Products

    Measuring Dies for Extruder

    The TOYOSEIKI Labo Plastomill is torque rheometer for process parameters optimization or laboratory-scale simulation of polymer materials.

  • Plastic Testing Products

    Melt Flow Rater

    Fully Automated Melt Indexer
    model D-M

    The TOYOSEIKI Melt Flow Rater is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238 in fully automated mode. This machine follows a sequential operation from the loading of materials, testing, data processing to the cleaning of barrel and performing the next test all on its own. This tremendously reduces the workload of the user who can go on to perform other job functions after loading in the samples.

     

  • Melt Flow Indexer

    Melt Indexer

    Model G-02

    The TOYOSEIKI Melt Indexer G-02 is designed for measuring of the Melt Flow Rate (MFR) and Melt Volume Rate (MVR) conforms to ISO 1133 (JIS K 7210) and ASTM D1238.

  • Melt Flow Indexer

    Melt Indexer – Multi Weight

    Model G-02 Multi-weight
    Semi-automated model for multiple weights test

    The TOYOSEIKI Melt Indexer G-02 Multi-weight is designed for ASTM D 1238 procedure D, multiple weights test. Up to 8 different weights can be used with automatic selection. Multi-weight concept (Automatic selection of the test weights) enables the user to perform measurement similar to a capillary rheometer with different test loads.

  • Rubber Testing Products

    Mooney Viscometer

    Model AM-4

    The TOYOSEIKI Mooney Viscometer model AM-4 conducts Mooney viscosity test and Mooney scorch test of un-vulcanized rubber according to ISO 289 (JIS K6300-1).

  • Paper & Pulp Testing Products

    Mullen Burst Tester

    Model M2-LD / M2-HD

    View complete details

Scroll to Top