,

Automatic Densimeter

model DSG-1

The TOYOSEIKI Automatic Densimeter measures density of materials such as polymers or rubber in various forms. The weighing operation is fully automatic and the density of the sample is automatically calculated and displayed on the screen at the end of the test. By using the optional attachments, it can also be used to determine density / specific gravity of liquids and rate of change of volume etc. An optional temperature sensor can also be added to allow direct measurement and input of air and
Liquid temperatures.

 

Specifications:
Balance unit capacity 100g
Balance unit resolution 0.0001g (0.1mg)
Balance unit repeatability – 0.1mg (Standard)
– 0.07mg (Optional high repeatability balance unit)
Beaker lifting mechanism – Motorized direct-drive actuator
– Lifting speed: 10, 20, 30mm/sec. (Selectable)
– Beaker stop position: Lower side: 0, 10, 20mm (Selectable)
Upper side: 80, 90, 100mm (Selectable)
Data storage 200 lots, 1000 sets of data
(Up to 100 sets of data per lot can be saved)
Immersion liquid Water, ethanol, acetone (to be used in the range of 10 to 30ºC)
Immersion liquid
temperature control (Option)		 Possible to control immersion liquid temperature with optional refrigerated circulator and double-wall beaker
Immersion time range 1 to 999 sec
Table of immersion liquid
density		 Table of water density is installed as standard
Possible to save up to 2 kinds of table (Such as ethanol or acetone)
Power requirement Single-phase, AC100 to 240V, 50/60Hz, 0.1kVA
Dimensions W290 x D443 x H890mm
Weight Approx. 35kg
Related standard – ISO 1183 (JIS K 7112), ISO 2781 (JIS K 6268)
– JIS Z 8807
– ASTM D792

Related products

Scroll to Top